What is a Tomato Drip Irrigation System?

Efficient and Sustainable Watering with Driptime

Irrigation is the method of delivering water to plants when they cannot absorb sufficient moisture naturally from the soil. For tomatoes, one of the most water-sensitive crops, the most efficient method among pressurized irrigation techniques is the Drip Irrigation System.

Thanks to Driptime’s advanced drip irrigation solutions, tomato cultivation becomes easier with simple installation, low labor requirements, and minimal energy consumption. Since water is one of the most critical elements affecting both yield and quality in tomato production, choosing the right drip irrigation system is essential.

How is a Tomato Drip Irrigation System Installed?

Precise Planning and Application with Driptime

In tomato drip irrigation systems, a lateral (drip line) is placed along each planting row. The system can be installed either before transplanting or during planting.

Before setting up a drip irrigation system for tomatoes, there are key factors that growers must consider:

Water Source: (Well, pond, reservoir, tank, etc.) It must be suitable for agricultural use and is critical for selecting the correct filtration system.
Location of the Water Source: Important for selecting the appropriate pump and ensuring optimal system pressure.
Water Source Flow Rate: Determines the necessary pump size, mainline and manifold pipe diameters, and the number of irrigation cycles needed to cover the entire field.
Soil Physical Properties: Essential for choosing the correct dripper spacing and flow rate.
Existing Pump Characteristics: If a pump is already available, its capacity influences pipe sizing and irrigation scheduling.
Field Slope: Determines whether pressure-regulated or non-regulated drip lines should be used.
Planting Density (Row Spacing x Plant Spacing): Helps calculate the total length of drip lines required.
Row Lengths: Affects the selection of drip lines based on their maximum run length capabilities.